ORPHEK Universal Atlantik LED Mounting Kit

Tank Mount Your Orphek Atlantik Lights!

Depending on your aquarium, you may need to mount your light off the back of your tank instead of a traditional hanging kit. Orphek now has a tank mounting kit made of thick aluminum. Each mounting arm comes with two mounts to allow for secure holding of the heavy Orphek LEDs but also gives you multiple different mounting configurations too. If you have a 40-gallon breeder or a 210 gallon these mounts can get your lights hanging right where you want them. 

Specifically designed to be compatible with Gen 1 or Gen 2 Atlantik V4 LEDs and Atlantik V4 Compact LEDs.

Each mount comes with all the hardware and mounting screws to securely mount your light off the back side of your aquarium. The mounts work best with rimless aquariums but can be used with rimmed tanks as well, but are not compatible with euro braced aquariums due to the nature of the mounting kit. You can easily mount your light onto the slide bracket and adjust the positioning right where you want it. If you have multiple lights, you will need one mounting kit per light. 

Specifications:

Max LED Mounting Height* - 15.75"

Min LED Mounting Height* - 8"

Max Reach** - 17" 

Min Reach** - 11"

Tank Thickness - 0.39" - 0.78" (10 - 20mm)

*Height is measured to the bottom of the Atlantik fixture

**Reach is measured to the center of the Atlantik fixture 

What's Included?

2x Aluminum Vertical Brackets

2x Aluminum Light Support Brackets

2x Aluminum Tank Clamps

2x Plastic Tank Protector Sheets

Mounting Screws & Hardware