A200 DC Controllable Pump (4,400 GPH) - Abyzz

Quality controllable DC pumps are hard to find, we did a bit of searching around and found Abyzz. A German company that is only using the best parts to make reliable, efficient controllable DC pumps. The easy to use driver boasts a full menu that has a LCD display allowing you to know the status of the pump, power usage, RPM, overall percentage of flow, temperature, and more. Abyzz pumps are fully controllable from 0-100% allowing you to set the flow exactly where you need it.

Max Flow - 4,400 GPH

Max Head - 28.6 feet

• Internal or External application
• Super silent operation
• Fully Controllable from 0-100% in 1% increments
• MCFS (Menu Controlled Flow Sequencer) for random, waves etc
• Integrated BoostMode
• Soft Start enabled
• Lockable cables and connections
• Rotating head
• Removable stand
• Enabled interface for peripheral devices

From titanium impeller shafts to the sinusoidal three-phase synchronous motor, the materials used in the Abyzz pumps have been carefully selected for harmonious compatibility and integration. Calcium deposits are easily the biggest avoidable issue with pumps used in saltwater aquariums. Abyzz has gone a step above the competition by including a pre-installed flush bearing, and silicon carbide bearings that will help protect against calcium deposits forming in the first place allowing a lifetime of operation.

One of the concerns when choosing a large pump should be power consumption and efficiency. Abyzz motors operate at an efficiency factor of over 90% making them the perfect energy saving solution. The driver and motor run off 12v allowing them to be used with an uncounted amount of applications. Each controller also has a 0-10v port for external control from aquarium controllers like the Neptune Apex system. Abyzz does make dedicated connections for different brands of aquariums controllers like GHL and Neptune that should be available very shortly. 

Specifications:

• BOOSTMODE max flow: 4,400 gph
• Normal mode max flow: 3,750 gph
• Head height max: 28.6 ft
• Rated input: 4-200W
• Input voltage: 110v 60Hz
• Operating Voltage: 12V
• Ambient temperature: 35.5°F - 104°F
• Maximum operating pressure: 21.75 PSI
• Maximum immersion depth: 6.5 ft
• Pump cable length: 9.75 ft
• Inlet Size: 50mm / 2 in
• Outlet Size: 40mm / 1.5 in
• Internal or External application
• Dimensions: 6.82" L x 5.95" W x 6.56" H

Whats Included

• Abyzz A200 pump
• 110V 60Hz driver
• Power cable: 5 ft
• Driver/Controller connecting cable: 6.5 ft
• Operating manual
• 10 year limited lifetime warranty

• WARRANTY

  CoralVue, Inc. and Abyzz hereby guarantee this product to be free from defects in material and workmanship for a period of:

  • 10 Years

  Warranty is activated when product is registered.

  This Standard Limited Warranty applies and is limited as follows:

  • To the product only as long as it remains in the possession of the original purchaser.
  • To the product that has not been subject to accident, misuse or abuse.
  • To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
  • That CoralVue be immediately notified in writing within ten (10) days of first knowledge of defect by owner or his agent.
  • That CoralVue, Inc. shall be given first opportunity to make any repairs, replacements or corrections to the defective construction within a reasonable period of time.
  • Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary or consequential damages of any nature however arising out of the use or inability to use because of the product defect.

This product was developed and is manufactured in Germany by Venotec.