Cold water upcharge for 50-65 degree units. This item is a special order item only.

Cold Water Cap Tube for 1/4 DS & 1/3 DS chillers. For temperatures between 50 & 65 degrees. This is a special order item only.

Cold water upcharge for 1/2 DS chillers, below 50 degrees. This item is a special order item only.

1/5 Horsepower Cyclone Water Chiller with Drop-In Titanium Coil, 115 volt. PRICE INCLUDES UPS GROUND SHIPPING. Uses 3.4 amps, 1,810 BTU removal capacity, flow rate of 6 GPM minimum past coil. Unit comes with 5 feet flexible refrigeration line. INCLUDES electronic single stage temperature controller. Uses ozone friendly refrigerant (134A). Dimensions 15 inch x 12 inch x 11 inch (LxWxH). Coil diameter is 3 inches in diameter. Coil length is 7 inches long.

1/4 Horsepower Cyclone Water Chiller with Drop-In Titanium Coil, 115 volt. PRICE INCLUDES UPS GROUND SHIPPING. Uses 5.4 amps, 3,080 BTU removal capacity, flow rate of 8 GPM minimum past coil. Unit comes with 5 feet flexible refrigeration line. INCLUDES single stage electronic temperature controller. Uses ozone friendly refrigerant (134A). Dimensions 15 inch x 12 inch x 11 inch (LxWxH). Coil diameter is 3 inches in diameter. Coil length is 9 inches long.

1/3 Horsepower Cyclone Water Chiller with Drop-In Titanium Coil, 115 volt. PRICE INCLUDES UPS GROUND SHIPPING. Uses 7.2 amps, 4,050 BTU removal capacity, flow rate of 10 GPM minimum past coil. Unit comes with 5 feet flexible refrigeration line. INCLUDES single stage temperature controller. Uses ozone friendly refrigerant (134A). Dimensions 19 inch x 14 inch x 11 inch (LxWxH). Coil diameter is 3 inches in diameter. Coil length is 10 inches long.

1/2 Horsepower Cyclone Water Chiller with Drop-In Titanium Coil, 115 volt. Uses 9.5 amps, 6,000 BTU removal capacity, flow rate of 12 GPM minimum past coil. Unit comes with 5 feet flexible refrigeration line. INCLUDES singe stage temperature controller. Uses ozone friendly refrigerant (134A). Dimensions 19 inch x 16 inch x 13 inch (LxWxH). Coil diameter is 4 inches in diameter. Coil length is 11 inches long.This item is a special order item only.

1/2 Horsepower Cyclone Water Chiller with Drop-In Titanium Coil, 230 volt. Uses 4.8 amps, 6,000 BTU removal capacity, flow rate of 12 GPM minimum past coil. Unit comes with 5 feet flexible refrigeration line. INCLUDES single stage electronic temperature controller. Uses ozone friendly refrigerant (134A). Dimensions 19 inch x 16 inch x 13 inch (LxWxH). Coil diameter is 4 inches in diameter. Coil length is 11 inches long. This item is a special order item only.

Bare probe and dry probe well assembly for inline temperature monitoring. Does not include temperature sensor. This item is a special order item only.

1.5 Horsepower Delta Star In-Line Water Chiller 230 volts. Uses 10.5 amps, 21,000 BTU removal capacity, 1and 1/2 inch FPT input and output, flow rate of 25 GPM Min and 80 GPM Max. INCLUDES single stage electronic temperature controller. Uses R22 refrigerant. Dimensions 31 inch x 26 inch x 19 inch (LxWxH). This item is a special order item only.

1/5 Horsepower Delta Star In-Line Water Chiller 115 volts. PRICE INCLUDES UPS GROUND SHIPPING. Uses 3.4 amps, 1,810 BTU removal capacity, 3/4 inch FPT input and output, flow rate of 6 GPM Min and 15 GPM Max. INCLUDES single stage electronic temperature controller. Uses ozone friendly refrigerant (134A). Dimensions 19 inch x 12 inch x 11 inch (LxWxH).

1/4 Horsepower Delta Star In-Line Water Chiller 115 volts. PRICE INCLUDES UPS GROUND SHIPPING. Uses 5.4 amps, 3,080 BTU removal capacity, 3/4 inch FPT input and output, flow rate of 8 GPM Min and 20 GPM Max. INCLUDES single stage electronic temperature controller. Uses ozone friendly refrigerant (134A). Dimensions 19 inch x 12 inch x 11 inch (LxWxH). 2 year manufacturer warranty included.

1/3 Horsepower Delta Star In-Line Water Chiller 115 volts. PRICE INCLUDES UPS GROUND SHIPPING. Uses 7.2 amps, 4,050 BTU removal capacity, 3/4 inch FPT input and output, flow rate of 10 GPM Min and 35 GPM Max. INCLUDES single stage electronic temperature controller. Uses ozone friendly refrigerant (134A). Dimensions 23 inch x 14 inch x 11 inch (LxWxH).

1/2 Horsepower Delta Star In-Line Water Chiller 115 volts. Uses 9.5 amps, 6,000 BTU removal capacity, 1-1/2 inch FPT input and output, flow rate of 12 GPM Min and 50 GPM Max. INCLUDES single stage electronic temperature controller. Uses ozone friendly refrigerant (134A). Dimensions 24 inch x 16 inch x 13 inch (LxWxH).

1/2 Horsepower Delta Star In-Line Water Chiller 230 volts. Uses 4.8 amps, 6,000 BTU removal capacity, 1-1/2 inch FPT input and output, flow rate of 12 GPM Min and 50 GPM Max. INCLUDES single stage electronic temperature controller. Uses ozone friendly refrigerant (134A). Dimensions 24 inch x 16 inch x 13 inch (LxWxH). This item is a special order item only.

3/4 Horsepower Delta Star In-Line Water Chiller 115 volts. Uses 13.0 amps, 9,500 BTU removal capacity, 1-1/2 inch FPT input and output, flow rate of 15 GPM Min and 50 GPM Max. INCLUDES single stage electronic temperature controller. Uses ozone friendly refrigerant (134A). Dimensions 25 inch x 21 inch x 15 inch (LxWxH). This item is a special order item only.

3/4 Horsepower Delta Star In-Line Water Chiller 230 volts. Uses 7.0 amps, 9,500 BTU removal capacity, 1-1/2 inch FPT input and output, flow rate of 15 GPM Min and 50 GPM Max. INCLUDES single stage electronic temperature controller. Uses ozone friendly refrigerant (134A). Dimensions 25 inch x 21 inch x 15 inch (LxWxH).

1 Horsepower Delta Star In-Line Water Chiller 230 volts. Uses 7.2 amps, 12,000 BTU removal capacity, 1-1/2 inch FPT input and output, flow rate of 20 GPM Min and 70 GPM Max. INCLUDES single stage electronic temperature controller. Uses ozone friendly refrigerant (134A). Dimensions 27 inch x 24 inch x 15 inch (LxWxH). This item is a special order item only.

115-Volt 20 Amp digital chiller controller in a NEMA enclosure. Comes with 20 Amp special power cord. This is a special order item only.

230-Volt 20 Amp digital chiller controller in a NEMA enclosure. Comes with 20 Amp special power cord. This is a special order item only.

2 Horsepower Titanium in-line chiller. 2 inch inlet and outlet ports. 24,000 btu removal capacity. Outdoor rated Trane compressor with heat strip for the exchange heater. Includes digital dual stage controller and a water flow switch. 36 inches long by 29 inches wide by 56 inches height. 11 amps at 230 volts.

TR115SN Probe only, Titanium encapsulated. Replacement for dual and single stage NEMA IV (Ranco brand) controllers only.

Replacement titanium temperature probe for Goldline dual and single stage temperature controllers. This item is a special order item only.

Digital Goldline Chiller Controller upgrade. This item is a special order item only.

Aqua Logic 1/3 horsepower Trim Line Cyclone drop-in chiller. Includes titanium coil, single stage digital controller,PRICE INCLUDES UPS GROUND SHIPPING! and 2 year warrenty. 4050 BTU removal capacity. 16 inches long by 9 inches wide by 21 inches tall. 7.2 amps. SHIPPING INCLUDED IN PRICE!!

Aqua Logic 1/3 horsepower Trim Line Delta Star In-line chiller. Includes titanium coil, single stage digital controller, and 2 year warrenty. 4050 BTU removal capacity. 19 inches long by 9 inches wide by 21 inches tall. 7.2 amps. Recommended flow rate is 10 - 20 gpm.

Aqua Logic NEMA IV Dual Stage Digital controller for heater and chiller with titanium temperature probe. 115 volt. For 1/6 HP through 1/2 HP chillers. -30 degrees F to 220 degrees F. Differential range: 1 degree F to 30 degrees F. Size: 6.50 inches x 2.75 inches x 2.75 inches. Six foot probe cable. Up to 15 feet available for nominal extra charge. ? For use with chillers up to 1/2 hp and heaters up to 1000 watts ? Simple keypad programming of setpoint temperature, differential and cooling/heating modes. ? LCD readout of sensor temperature, control settings, relay status and onboard diagnostics. ? Wide setpoint temperature range (-30°F to 220°F) and differential adjustment (1°F to 30°F). ? User selectable Fahrenheit/Celsius scales. ? Lockout switch to prevent tampering by unauthorized personnel. ? NEMA Type 4X enclosure rated watertight for outdoor use. ? Watertight Titanium Encapsulated Thermistor.

NEMA 4 Digital Chiller Controller with titanium probe. 115 volt. For 1/6 HP through 1/2 HP chillers. -30 degrees F to 220 degrees F. Differential range: 1 degree F to 30 degrees F. Size: 6.50 inches x 2.75 inches x 2.75 inches. Six foot probe cable. Up to 15 feet available for nominal extra charge. ? For use with chillers up to 1/2 hp or heaters up to 1000 watts ? Simple keypad programming of setpoint temperature, differential and cooling/heating modes. ? LCD readout of sensor temperature, control settings, relay status and onboard diagnostics. ? Wide setpoint temperature range (-30°F to 220°F) and differential adjustment (1°F to 30°F). ? User selectable Fahrenheit/Celsius scales. ? Lockout switch to prevent tampering by unauthorized personnel. ? NEMA Type 4X enclosure rated watertight for outdoor use. ? Watertight Titanium Encapsulated Thermistor.

NEMA 4 Digital Chiller Controller with titanium probe. 230 volt. For 1/2 HP chillers. -30 degrees F to 220 degrees F. Differential range: 1 degree F to 30 degrees F. Size: 6.50 inches x 2.75 inches x 2.75 inches. Six foot probe cable. Up to 15 feet available for nominal extra charge. ? For use with chillers up to 1/2 hp or heaters up to 1000 watts ? Simple keypad programming of setpoint temperature, differential and cooling/heating modes. ? LCD readout of sensor temperature, control settings, relay status and onboard diagnostics. ? Wide setpoint temperature range (-30°F to 220°F) and differential adjustment (1°F to 30°F). ? User selectable Fahrenheit/Celsius scales. ? Lockout switch to prevent tampering by unauthorized personnel. ? NEMA Type 4X enclosure rated watertight for outdoor use. ? Watertight Titanium Encapsulated Thermistor.

Medusa Temperature Probe (Replacement) For air or water use.

Medusa Dual Digital Chiller and Heater Controller. 3 digit display. 115 volts.

Medusa Single Stage Chiller or Heater Controller. 3 digit display. 115 volts.

1/2 Horsepower Pacific Coast chiller unit. High quality, durable, completely enclosed with digital control. Titanium heat exchanger. Water flow 750gph minimum/1500 gph maximum. 15-inches x 19.5-inches x 15.5-inches (LxWxH). BTU Capacity 6000. 3/4-inch PCV inlet & outlet connections. Digital controller has built-in memory feature that will retain program in case of a power outage. 6000 BTU removal capacity. Operates at 60 db noise level. 10 degree cooling up to 450 gallons & 30 degree cooling up to 240 gallons. Item must ship via freight. NO UPS. 9.9 amps.

Part Number: CH-PC-C-0500-220V Brand Name: Pacific Coast Description: 1/2 Horsepower 220-VOLT Pacific Coast chiller unit. High quality, durable, completely enclosed with digital control. Titanium heat exchanger. Water flow 750gph minimum/1500 gph maximum. 15-inches x 19.5-inches x 15.5-inches (LxWxH). BTU Capacity 6000. 1-inch PCV inlet & outlet connections. Digital controller has built-in memory feature that will retain program in case of a power outage. 6000 BTU removal capacity. Operates at 60 db noise level. 10 degree cooling up to 450 gallons & 30 degree cooling up to 240 gallons. Item must ship via freight.

1 Horsepower Pacific Coast chiller unit. High quality, durable, completely enclosed with digital control. Titanium heat exchanger. Water flow 1000gph minimum/2000 gph maximum. 1-inch PVC slip connections 110V/18amps. Digital controller has built-in memory feature that will retain program in case of a power outage. 12000 BTU removal capacity. Operates at 60 db noise level. Dimensions - 21-inches x 19-inches x 15-inches (LxWxH). 30 degree cooling up to 750 gallons & 10 degree cooling up to 1000 gallons.

1 Horsepower 220 volt Pacific Coast chiller unit. High quality, durable, completely enclosed with digital control. Titanium heat exchanger. Water flow 1000gph minimum/2000 gph maximum. 1-inch PVC slip connections 220V/9amps. Digital controller has built-in memory feature that will retain program in case of a power outage. Operates at 60 db noise level. Dimensions - 21-inches x 19-inches x 15-inches (LxWxH). BTU removal capacity 12,000. 30 degree cooling up to 750 gallons & 10 degree cooling up to 1000 gallons.

2 horsepower Pacific Coast chiller. High quality durable, completely enclosed. Digital control, Titanium heat exchanger. 1-1/2 inch inlet and outlet ports. 22 amps @ 220 volts. Minimum water flow thru unit is 2000 gph. Digital controller has built-in memory feature that will retain program in case of a power outage. 24,000 BTU removal capacity. Operates at 75-80 db noise level. 21-1/2 inch L x 25 inch W x 21 inch H.

3 horsepower Pacific Coast chiller. High quality durable, completely enclosed. Digital control, Titanium heat exchanger. 1-1/2 inch inlet and outlet ports. 28 amps @ 220 volts. Minimum water flow thru unit is 3500 gph. Digital controller has built-in memory feature that will retain program in case of a power outage. 36,000 BTU removal capacity. Operates at 65-68 db noise level. 28.5 inch L x 20 inch W x 27.5 inch H.

Pacific Coast CL-150 micro chiller. 150 watt electronic water chiller. Titanium heat exchanger. Uses 200 watt power consumption. 150 watt refrigeration / heating capacity. Uses computerized control to automatically switch from heat mode to cool mode. Near silent operation. 1/2 inch input and output barb fititng connection. Recommended flow rate of 160 to 300 gph. 12 inches long by 10 inches wide 9 inches high.

1/10 Horsepower Pacific Coast chiller unit, model CL-280. High quality, durable, completely enclosed with digital contoller. Titanium heat exchanger. Water flow 500gph minimum/800gph maximum. Hose connections 1/2-inch or 5/8-inch. Digital controller has built-in memory feature that will retain program in case of a power outage. 1200 BTU removal capacity. Operates at 38 db noise level. Dimensions - 12-inches x 12-inches x 13.5-inches (LxWxH). 10 degree cooling up to 110 gallons & 30 degree cooling up to 60 gallons. 2.9 amps

1/6 Horsepower Pacific Coast chiller unit, model CL-450. High quality, durable, completely enclosed with digital contoller. Titanium heat exchanger. Water flow 600gph minimum/1000gph maximum. Hose connections 5/8 inch or 3/4 inch. Digital controller has built-in memory feature that will retain program in case of a power outage. 2000 BTU removal capacity. Operates at 42 db noise level. Dimensions - 11.5-inches x 15-inches x 17-inches (LxWxH). 10 degree cooling up to 125 gallons & 30 degree cooling up to 80 gallons. 3.4 amps

1/4 Horsepower Pacific Coast chiller unit, model CL-650. High quality, durable, completely enclosed with digital control. Titanium heat exchanger. Water flow 600gph minimum/1000gph maximum. Hose connections 5/8 -inches or 3/4 inches. Digital controller has built-in memory feature that will retain program in case of a power outage. 3000 BTU removal capacity. Operates at 42 db noise level. Dimensions - 11.5-inches x 15-inches x 17-inches (LxWxH). 10 degree cooling up to 180 gallons & 30 degree cooling up to 100 gallons. 5.8 amps

Description: Pacific Coast CL-85 micro chiller. 85 watt electronic water chiller. Titanium heat exchanger. Uses 120 watt power consumption. 85 watt refrigeration / heating capacity. Uses computerized control to automatically switch from heat mode to cool mode. Near silent operation. 1/2 inch input and output barb fititng connection. Recommended flow rate of 80 to 160 gph. 8.5 inches long by 10 inches wide 7 inches high.

1/2 Horsepower Pacific Coast chiller / HEATER unit. High quality, durable, completely enclosed with digital control. Titanium heat exchanger. Water flow 750gph minimum/1500 gph maximum. Digital controller has built-in memory feature that will retain program in case of a power outage. 6000 BTU removal capacity. Operates at 60 db noise level. 15-inches x 19.5-inches x 15.5-inches (LxWxH). BTU Capacity 6000. 3/4-inch PCV inlet & outlet connections. 10 degree cooling up to 450 gallons & 30 degree cooling up to 240 gallons.

Description: 1 Horsepower 110V chiller/heater combination unit with remote control temperature programming. The finest chiller/heater unit on the market. Low noise rating of 60 db. Special precise thermostate within +/- 2 degrees Farenheit. Fully enclosed. Titanium heat exchanger. 18 amps. 1 inch inlet and outlet connections. 10 degree 1200 gallons. 30 degree 750 gallons.

Description: 2 HP Chiller/Heater unit Finest unit on the market today! Low noise rating of 75 db. 220V Chiller/Heater unit with precise temperature control within +/- 2 degrees Farenheit. Fully enclosed. Titanium heat exchanger. 1 1/4 inch inlet and outlet. 22 amps.

Description: 3 HP 220 volt Chiller/Heater combination unit. Remote control unit with precise temperature control within +/- 2 degrees Farenheit. 36 amps. 1-1/2 inch suction and discharge ports. Fully enclosed. Low noise rating of 75 db. Best on the market! 1 year fully guaranteed!

Brand Name: Sea Line Description: 1 Horsepower In Line Sea Line chiller. Comes with built in temperature controller. Chiller uses R22 refridgerant. Titanium heat exchanger. Uses 7.6 Amps. Hose connections 1-inch. Water flow 500gph minimum/900gph maximum. 12,000 BTU removal capacity. All Sea Line chillers are guaranteed for one year. Dimensions: 20-inches x 16-inches x 19-inches. 10 degree cooling up to 1000 gallons & 30 degree cooling up to 600 gallons.

Brand Name: Sea Line Description: 1 Horsepower In Line Sea Line Heater/Chiller. Comes with built in temperature controller. Chiller uses R22 refridgerant. Titanium heat exchanger. Uses 7.6 Amps. Hose connections 1-inch. Water flow 500gph minimum/900gph maximum. 12,000 BTU removal capacity. All Sea Line chillers are guaranteed for one year. Dimensions: 20-inches x 16-inches x 19-inches. 10 degree cooling up to 1000 gallons & 30 degree cooling up to 600 gallons.

Brand Name: Sea Line Description: 1/10 Horsepower In Line Sea Line chiller. Comes with built in temperature controller. Chiller uses Freon free R134a refrigerant, which is safe and environment friendly. Titanium heat exchanger. Uses 2.2 Amps. Hose connections 1/2-inch or 5/8-inch. Water flow 200gph minimum/350gph maximum. 1200 BTU removal capacity. All Sea Line chillers are guaranteed for one year. Dimensions: 16-1/2-inches x 10-inches x 14-inches. 10 degree cooling up to 85 gallons & 30 degree cooling up to 40 gallons.