Description: Hang on phosphate filter, Aqualine Buschke. The phosphate filter is a compact chemical filtration chamber for aquarium use. It can be installed in line with any standard canister filter, or via a separate pump. The phosphate filter contains 1 liter of Antiphos. This reduces the level of phosphate and thereby curtails the growth of filamentous algae. Depending on the phosphate level, one filling of Antiphos may be sufficient for an aquarium up to 100 gallons for between four and twelve weeks. The phosphate filter can be used for fresh and salt aquaria. Dimensions - total length is 14 inches and the diameter is 3.2 inches. The hose connections are 3/4 inch.

Carbolit Reactor, Aqualine Buschke. The Carbolit Reactor is a compact chemical filtration chamber for aquarium use. It can be installed in-line with any standard canister filter or used with a separate pump. The Carbolit Reactor contains one liter of pH neutral Carbolit. The Carbolit Reactor can be used for fresh and salt water aquaria. One filling lasts, depending on the desired use, between 10 days (removal of medications) or up to 12 months (long-term use as biological filter) in a 100 gallon aquarium. Dimensions - total length is 14 inches and the diameter is 3.2 inches. The hose connections are 3/4 inch.

Bulk Replacement Lava Rock (50 lbs). This item is a special order item only.

Deniballs 500 pc. bucket. 15 liter bucket. This item is a special order item only. 1 per case.deniballs are made of special biological produced plastic . if there is no oxygen anaerobic bacteria can metabolize this material. these deniballs are recommended to be changed every 12 months to ensure free denitrification in fresh and salt water tanks.

Aqua Medic Marine 500 in-tank filtration system for up to 125 gallons fish aquarium, 19 inch L by 7.5 inch W by 19 inch T glass sump, Midi Flotor protein skimmer with air pump, biological trickle filter module, carbon and mechanical chamber and a nitrate reductor. Includes an Eheim pump for circulation within the filter system. This system is designed to be placed within the aquarium itself or an existing sump filter. This item is a special order item that is drop shipped direct from Aqua Medic USA. 1 per case.

Aqua Medic 1000 Nitrate Reducer up to 250 gallons. The Maxi Nitrate Reducer is an anaerobic biological reactor for the removal of nitrates from marine and fresh water aquaria. It has a large volume of 10 liters (2.5 gallons) and an internal circulation pump. The Nitrate Reducer works with a flow rate of 1 to 4 liters per hour (0.25 to 1 gallon per hour). This condition, in the absence of oxygen, promotes special bacteria to metabolize nitrate. Denimar tablets or Deniballs are used as an organic energy source. To monitor this process, it is possible to use a redox potential monitor (ORP monitor) in conjunction with the probe inserted in the supplied port. The Nitrate Reductor is a closed unit that can be integrated in filter systems, but it may also be used to stand alone under the aquarium. The water supply can be via a bypass from a circulation pump, canister filter or a small powerhead. 1 per case.

Aqua Medic 5000 Nitrate Reducer up to 500 gallons. The 5000 Nitrate Reducer is an anaerobic biological reactor for the removal of nitrates from marine and fresh water aquaria. It has a large volume of 10 liters (2.5 gallons) and an internal circulation pump. The Nitrate Reducer works with a flow rate of 1 to 4 liters per hour (0.25 to 1 gallon per hour). This condition, in the absence of oxygen, promotes special bacteria to metabolize nitrate. Denimar tablets or Deniballs are used as an organic energy source. To monitor this process, it is possible to use a redox potential monitor (ORP monitor) in conjunction with the probe inserted in the supplied port. The Nitrate Reductor is a closed unit that can be integrated in filter systems or can be used as a stand alone filter. The water supply can be via a bypass from a circulation pump, canister filter or a small powerhead. 1 per case.

Deni Balls .8 liter, Aqua Medic. Filter material and bacterium food for the Nitratereductor. Deniballs are made of a special biologically produced plastic material. In the absence of oxygen, anaerobic metabolize this material. The bacteria are used for the reduction of nitrates, thus reducing nitrate to nitrogen gas. One to three Pyamid packages (of 0.8 liters each) is enough to supply the Nitratereductor as the sole food source for 12 months. For the Nitratereductor 5000, about 5 liters (1.25 gallons) are required. Changing the Deniballs after approximately 12 months is recommended to ensure safe and maintenance free denitrification in fresh and salt water aquariums. 5 per case.

Deniballs 160 pc. bucket. 5 liter bucket. This item is a special order item only. 1 per case. Deniballs are made of special biological produced plastic . if there is no oxygen anaerobic bacteria can metabolize this material. these deniballs are recommended to be changed every 12 months to ensure free denitrification in fresh and salt water tanks.

Aqua Medic AquaDisc Filter Sponge size 17. Roung filter sponge, manufactured from salt water safe, food grade sponge. The Duo-pack, (2 pcs), contains one fine and one coarse sponge The AquaDisc fits many types of canister filters. The filter sponge is suited for biological and for mechanical filtration.

Denimar Powder (150 gram). Nutrient powder for the Nitratreductor. The bacteria within an anaerobic biofilter need organic nutrients as their energy source to remove nitrate. Denimar contains organic substances which dissolve slowly in water, and are taken up by the bacteria. If Denimar is dosed daily, high nitrate removal rates can be achieved in the Nitraereductor. Denimar is suited for salt and fresh water aquaria. It contains no fertilizers and does not foster the growth of algae.

System 1 Pressure Filter. An easy, quick filtering water

1 1/2 inch micron bag adapter.

2 inch f.p.t. micron bag adapter

Part Number: FI-ATPE100P1P-H-10PA Brand Name: Live Rock N Reef Description: 16 inch 100 micron bag (plastic ring) with nylon strap handle. This pack contains a quantity of 10 micron bags. 6 inch diameter filter bag manufactured with thick felt material is an excellent mechanical filter. The plastic ring is sewn into the top of the bag. The ring does not block the opening of the bag it only helps keep the bag open. The nylon strap is about one inch wide and it allows the bag to hang down about three inches. The lower the micron rating, the smaller particulate size it will trap (meaning the lower the number, the faster the bag will clog). Can be rinsed or washed and re-used again and again. This pack contains a quantity of 10 micron bags.

Part Number: FI-ATPE100P1R Brand Name: Live Rock N Reef Description: 16 inch 100 micron bag (draw tie). 6 inch diameter filter bag manufactured with thick felt material is an excellent mechanical filter. The draw tie is sewn into the top of the bag, similar to a pair of sweat pants, and is used to close the bag opening The lower the micron rating, the smaller particulate size it will trap (meaning the lower the number, the faster the bag will clog). Can be rinsed or washed and re-used again and again. PE100P1-DS

Part Number: FI-ATPE100P1R-10PACK Brand Name: Live Rock N Reef Description: 16 inch 100 micron bag (draw tie). This pack contains a quantity of 10 micron bags. 6 inch diameter filter bag manufactured with thick felt material is an excellent mechanical filter. The draw tie is sewn into the top of the bag, similar to a pair of sweat pants, and is used to close the bag opening The lower the micron rating, the smaller particulate size it will trap (meaning the lower the number, the faster the bag will clog). Can be rinsed or washed and re-used again and again. This pack contains a quantity of 10 micron bags. PE100P1-DS

32 inch 100 micron bag (plastic ring) with nylon strap handle.

Part Number: FI-ATPE25P1P-H Brand Name: Live Rock N Reef Description: 16 inch 25 micron bag (plastic ring) with nylon strap handle. 6 inch diameter filter bag manufactured with thick felt material is an excellent mechanical filter. The plastic ring is sewn into the top of the bag. The ring does not block the opening of the bag it only helps keep the bag open. The nylon strap is about one inch wide and it allows the bag to hang down about three inches. The lower the micron rating, the smaller particulate size it will trap (meaning the lower the number, the faster the bag will clog). Can be rinsed or washed and re-used again and again. PE25P1PP-H

Ultima II Commercial Filter with 3 inch inlet-outlet, 49.5 to 196 GPM, 16.5 sq.ft. of media, max operating pressure up to 100 psi, 36 inch diameter, 78.75 inch length, 63 inch height, clear 11 inch by 15 inch manhole, permanent media design, microprocessor controlled backwash with gauge panel, rate of flow adjustment. This item is a special order item that is drop shipped direct from Aqua Ulraviolet.

Fluidized Bed Media - Bio Con Labs 1 lb. Quartz crystal.

Boyd Chemi Pure 10oz. 12 per case.

Boyd Chemi Mat - 24 per case.

Boyd Chemi-Clean. Dosage: 1 scoop per 10 gallons (scooper included). Treats 300 gallons.

8 inch by 40 inch Fiberglass Tank with Base and 2-1/2 inch Opening (White)

10 inch by 40 inch Fiberglass Tank with Base and 2-1/2 inch Opening (White)

10 inch by 54 inch Fiberglass Tank with Base and 2-1/2 inch Opening (White)

7 inch by 35 inch Fiberglass Tank with Base and 2-1/2 inch Opening (White)

12 inch by 52 inch Fiberglass Tank with Base and 2-1/2 inch Opening (White)

6 inch by 18 inch Fiberglass Tank with Base and 2-1/2 inch Opening (White)

14 inch by 65 inch Fiberglass Tank with Base and 2-1/2 inch Opening (White). This item is a special order item only.

16 inch by 65 inch Fiberglass Tank with Base and 2-1/2 inch Opening (White). This item is a special order item only.

Custom 18 inch x 15 inch x 16 inch (LxWxH) with lid, union, micron bag holder and two micron bags. DOES NOT INCLUDE ANY OTHER PARTS.

Custom 19 inch x 16 inch x 17 inch (LxWxH) with lid, union, micron bag holder and two micron bags. DOES NOT INCLUDE ANY OTHER PARTS.

Custom 22 inch x 15 inch x 14 inch (LxWxH) with lid, union, micron bag holder and two micron bags. DOES NOT INCLUDE ANY OTHER PARTS.

Custom 23 inch x 20 inch x 16 inch (LxWxH) with lid, union, micron bag holder and two micron bags. DOES NOT INCLUDE ANY OTHER PARTS.

24 inch L by 10 inch W by 16 inch H acrylic micron bag filtration sump with water change system, 1/2 lb. carbon media in a nylon bag and two micron filter bags. 1/4 inch American acrylic. Custom designed around your protein skimmer to trap the bubbles from your skimmer and keep them out of your aquarium. Includes return bulkhead(s). Includes lid with quick disconnect union for easy removal. Includes dual probe holder.

24 inch L by 12 inch W by 16 inch H acrylic micron bag filtration sump with water change system, 1/2 lb. carbon media in a nylon bag and two micron filter bags. 1/4 inch American acrylic. Custom designed around your protein skimmer to trap the bubbles from your skimmer and keep them out of your aquarium. Includes return bulkhead(s). Includes lid with quick disconnect union for easy removal. Includes dual probe holder.

24 inch L by 14 inch W by 16 inch H acrylic micron bag filtration sump with water change system, 1/2 lb. carbon media in a nylon bag and two micron filter bags. 1/4 inch American acrylic. Custom designed around your protein skimmer to trap the bubbles from your skimmer and keep them out of your aquarium. Includes return bulkhead(s). Includes lid with quick disconnect union for easy removal. Includes dual probe holder.

24 inch L by 16 inch W by 16 inch H acrylic micron bag filtration sump with water change system, 1/2 lb. carbon media in a nylon bag and two micron filter bags. 1/4 inch American acrylic. Custom designed around your protein skimmer to trap the bubbles from your skimmer and keep them out of your aquarium. Includes return bulkhead(s). Includes lid with quick disconnect union for easy removal. Includes dual probe holder.

Large Nylon Bag with 7 lbs. Carbon for Nuclear and Ocean Clear Canister filters

25 inch L by 24 inch W by 16 inch H acrylic micron bag filtration sump with water change system, 1/2 lb. carbon media in a nylon bag and two micron filter bags. 1/4 inch American acrylic. Custom designed around your protein skimmer to trap the bubbles from your skimmer and keep them out of your aquarium. Includes return bulkhead(s). Includes lid with quick disconnect union for easy removal. Includes dual probe holder. This item is a special order item only.

30 inch L by 12 inch W by 16 inch H acrylic micron bag filtration sump with water change system, 1/2 lb. carbon media in a nylon bag and two micron filter bags. 1/4 inch American acrylic. Custom designed around your protein skimmer to trap the bubbles from your skimmer and keep them out of your aquarium. Includes return bulkhead(s). Includes lid with quick disconnect union for easy removal. Includes dual probe holder.

30 inch L by 14 inch W by 16 inch H acrylic micron bag filtration sump with water change system, 1/2 lb. carbon media in a nylon bag and two micron filter bags. 1/4 inch American acrylic. Custom designed around your protein skimmer to trap the bubbles from your skimmer and keep them out of your aquarium. Includes return bulkhead(s). Includes lid with quick disconnect union for easy removal. Includes dual probe holder.

30 inch L by 14 inch W by 16 inch H acrylic micron bag filtration sump with water change system, 1/2 lb. carbon media in a nylon bag and two micron filter bags. 3/8 inch American acrylic. Custom designed around your protein skimmer to trap the bubbles from your skimmer and keep them out of your aquarium. Includes return bulkhead(s). Includes lid with quick disconnect union for easy removal. Includes dual probe holder. This item is a special order item only.

30 inch L by 16 inch W by 16 inch H acrylic micron bag filtration sump with water change system, 1/2 lb. carbon media in a nylon bag and two micron filter bags. 1/4 inch American acrylic. Custom designed around your protein skimmer to trap the bubbles from your skimmer and keep them out of your aquarium. Includes return bulkhead(s). Includes lid with quick disconnect union for easy removal. Includes dual probe holder.

32 inch L by 16 inch W by 20 inch H acrylic single micron and bioball filtration sump with removable drip tray, dual inputs with removable lids, carbon media, water change system and replacement bags. Includes 1 cubic foot of bio ball media (1-1/2 inch black bio balls). Includes return bulkhead(s). Includes lid with quick disconnect union for easy removal. Includes dual probe holder.

36 inch L by 16 inch W by 16 inch H acrylic micron bag filtration sump with water change system, 1/2 lb. carbon media in a nylon bag and two micron filter bags. 1/4 inch American acrylic. Custom designed around your protein skimmer to trap the bubbles from your skimmer and keep them out of your aquarium. Includes return bulkhead(s). Includes lid with quick disconnect union for easy removal. Includes dual probe holder.

36 inch L by 18 inch W by 20 inch H acrylic refugium sump with 2 small dividers. 3/8 inch American acrylic. One divider is located 4 inches from one side and is 8 inches tall the second divider located 4 inches from the other side and is 14 inches tall. Includes a lid over the entire unit.

36 inch long by 30 inch wide by 21 inch tall custom filtration sump out of 3/8-inch material. This includes a micron bag holder but no fittings, chemical chamber or probe holders. SPECIAL ORDER ITEM ONLY